Hiboost Triple Band GSM Boosters 4000 m² EGSM900 DCS/LTE1800 + WCDMA2100 MHz (Hi20-3S)
The Hi20-3S mobile booster integrates the most powerful consumer boosting technology with remote monitoring via a free app. Increase your signal and level up the connection quality!
HiBoost Hi20-3S is a powerful professional mobile signal repeater designed to cover large office buildings, hotels, airports, supermarkets, restaurants, etc.
Supporting 3 frequency bands at a time, the booster guarantees faster data speeds and clearer calls in every corner.
* Mind that the level of signal inside your house/office depends on the outdoor signal reception ouside it and your building design features.
SET-UP AND MONITORING VIA THE HIBOOST APP
HiBoost signal booster is powered by a free cloud-based HiBoost App, Signal Supervisor. Thanks to it you can control your device directly from your phone or tablet at anytime from anywhere and benefit from much easier and more efficient installation via an online guide.
Go through all intsallation steps via an app and find the best position for the outdoor antenna easily with a professional signal meter tool
Keep informed on booster performance status thanks to push notifications
Share your device with competent tech experts and receive assistance online
DOWNLOAD SIGNAL SUPERVISOR APP FROM
GOOGLE PLAY AND APP STORE
WHAT STANDARD KIT INCLUDES
Every HiBoost solution comes in a kit with the necessary installation components. HiBoost Hi20-3S standard kit includes:
mobile signal booster
outdoor directional antenna
50ft (15.2 m) HiBoost 300 cable
12V/ 7A, AC/DC power supply
Power cord with European standard plug
EXTEND YOUR COVERAGE
It’s easy to customize a boosting solution according to your needs. You can add up to 6 extra indoor panel or omni antennas (view Optional Kits) to a PRO series repeater and greatly increase its coverage up to 4000 sq.m.
Standard Kit + 1 Panel PRO/ Omni PRO Kit
Coverage up to 1500 sq.m.
Standard Kit + 2 Panel PRO/ Omni PRO Kits
Coverage up to 2000 sq.m.
Standard Kit + up to 6 Panel PRO/ Omni PRO Kits
Coverage up to 4000 sq.m
POWERFUL NETWORK PROTECTION
No worries, all HiBoost signal repeaters are enabled with smart software that guarantees overall network protection even in the hardest signal reception conditions.
AUTOMATIC GAIN CONTROL (AGC)
SELF-OSCILLATION DETECTION
The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids the interference with your operator’s network and saves the booster from overload.
Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.
FULLY CERTIFIED PRODUCT
HiBoost products are of high quality standard which is proved by the compliance with the international and EU health and safety regulations (CE RED 2014/53/EU, RoHS, ISO 9001:2015)
HOW IT WORKS
1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.
2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.
3. The indoor antenna spreads the enhanced signal throughout the desired area.
4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!
TECH SPECS
WORKING BANDS
900, 1800, 2100 MHz
UL FREQUENCY RANGE
880-915 /1710-1785 /1920-1980 MHz
DL FREQUENCY RANGE
925-960 /1805-1880 /2110-2170 MHz
SUPPORTED STANDARDS
EGSM, UMTS, DCS/ LTE
V.S.W.R
Typical≤2
MAXIMUM GAIN
70 db
MGC (STEP ATTENUATION)
≥ 31 db/ 1 db step
INTELLIGENT AGC
ALC ≥42dB ISO ≥42dB
GAIN FLATNESS
Typical≤5dB (p-p)
NOISE FIGURE @ MAX. SYSTEM GAIN
Typical≤5dB
GROUP DELAY
≤1μs
FREQUENCY STABILITY
≤0.01ppm
POWER SUPPLY
Input AC 100~264 V, 50/60 Hz, Output DC 12V/7A
POWER CONSUMPTION
≤24W
IMPEDANCE
50 ohm
LCD DISPLAY
Frequency, Gain, Output Power, ALC, ISO indicators
